Aplus 33 – Tile Adhesive

Adhesive for granite and granito as well as natural stones on concrete floor or wall. As substitute for cement that produces durable and waterproof tile adhesive for
both interior and exterior area.
  • Consistent mixture quality
  • Ready to use, just by adding water
  • High adhesion
  • Adjustable setting time to buy more time to install and arrange tiles
  • Installed only 3 mm with jagged trowel
Technical Data
Color : grey
Mixing ingredient : just add water to material with 1 : 4,5 ratio
Adhesive strength : >1/74 N/mm2 after 28 days
Industrial Standard : EN 12004 (German standard)
  • Clean surface from dust and other dirt that can reduce adhesive effectiveness. Both wall and floor should have already been completed for at least 28 days.
  • Do not soak ceramic / tiles.
  • The spots where there will be joints should be determined on planning. Joints should be placed per five meters, in every room corner, or in building material joints.
  • Floor gaps should be filled or covered using elastic material like silicone sealant.
Technique Usage
  • Add water only and mix thoroughly, then install tiles with 3-4mm mixture thickness.
  • Apply using jagged trowel.
Contents: 5 kg and 25 kg
Water requirement: 6 – 6.5 Liter / 25 kg
Coverage: ± 5 – 6.5 m2 / 3mm