Aplus 10 - Tile Adhesive for Ceramic

To stick ceramic on dry area. Can also be used for terrazzo, marble, stones, slate and Quarry tiles.
Features
  • Consistent mixture quality
  • Ready to use, add water only
  • High adhesion
  • Adjustable setting time to buy more time for tile installation and setting
  • Installed only 3 mm with jagged trowel
 
Technical Data
Color : grey
Mixing ingredient : material should only be mixed with
water with 1:4,5 ratio
Adhesive strength : >1.30 N/mm2 after 28 days
Industrial standard : EN 12004 (German standard)
 
Preparation
  • Clean surface from dust and other dirt that may reduce bonding effectiveness on plastering surface. Both wall and floor should have already been completed for at least 28 days. 
  • Do not soak ceramic or tiles
 
Joints
  • The spots where there will be joints should be determined on planning. Joints should be placed per five meters, in every room corner, or in building material joints.
  • Floor gaps should be filled or covered using elastic material like silicone sealant.
 
Technical Usage
  • For medium-sized tiles, use 6 x 6 mm jagged trowel.
  • Tiles with flat back surface up to 20 x 20 cm size need 3 – 3,5 kg/m2 for installation.
 
Packaging
25 kg paper bag
5 kg plastic bag
 

 

INFORMATION MEDIA